Home › Audio / Visual / Telematics › CELLULAR COMMUNICATION › TOLL COLLECTION ECU › from 2021.03
RM3650E _56 Audio / Visual / Telematics _103766 CELLULAR COMMUNICATION _0477671 TOLL COLLECTION ECU A

CELLULAR COMMUNICATION  TOLL COLLECTION ECU  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ELECTRONIC TOLL COLLECTION DEVICE

HINT:

When installing the Electronic Toll Collection Device (ETC), it is imperative to install a new part.


a.
E467418

Remove the protective film from Electronic Toll Collection Device (1).


b.

Affix the Electronic Toll Collection Device (1) parallel to the connection box (3) onto the windscreen (4) and press it firmly onto the windscreen (4).


c.

Distance (A) between the Electronic Toll Collection Device (1) and the interior mirror cover (2) must be at least 25 mm.


d.
E467419

Connect connector (1).


e.
E467416

Position the lid (1) on the connection box.


Hide 2. PUTTING THE ELECTRONIC TOLL COLLECTION DEVICE INTO OPERATION

a.
E467420

Briefly press the button (1) (<3 seconds).

The LED (2) lights up green for 5 seconds and there is no acoustic signal.

The Electronic Toll Collection Device has been put into operation.