Home › TRANSMISSION ยท A340E AUTOMATIC TRANSMISSION › AUTOMATIC TRANSMISSION SYSTEM

AUTOMATIC TRANSMISSION SYSTEM > FAIL-SAFE CHART

for Preparation Click here



FAIL-SAFE
This function minimizes the loss of the ECT (Electronic Controlled Automatic Transmission) functions when any malfunction occurs in each sensor or solenoid.
*1: AI (Artificial Intelligence) -SHIFT control
In addition to switching of the shift pattern through the pattern select switch, the AI-SHIFT control enables the ECM to estimate the road conditions and the driver's intention in order to automatically select the optimal shift pattern. As a result, a comfortable ride has been realized.

Malfunction Part
Function
Input Speed Sensor (NCO)
During an input speed sensor malfunction, shift control is effected through the output speed sensor signal (SP2).
During an input speed sensor malfunction, AI-SHIFT*1 and flex lock-up clutch control are prohibited.
Output Speed Sensor (SP2)
During an output speed sensor malfunction, shift control is effected through the input speed sensor signal (NCO).
During an output speed sensor malfunction, AI-SHIFT*1 and flex lock-up clutch control are prohibited.
No. 1 ATF Temperature Sensor
During an No. 1 ATF temperature sensor malfunction, flex lock-up clutch control is prohibited.
Shift Solenoid Valve S1 and S2
The current to the failed solenoid valve is cut off and control is effected by operating the other solenoid valves with normal operation.
Shift control is effected depending on the failed solenoid as described in the table on the next page.
Shift Solenoid Valve SLU
During a solenoid valve SLU malfunction, the current to the solenoid valve is stopped. This stops lock-up control and flex lock-up control, and fuel economy decreases.
Shift Solenoid Valve SLT
During a solenoid valve SLT malfunction, the current to the solenoid valve is stopped. This stops line pressure optimal control, and the shift shock increases. However, shifting is effected through normal clutch pressure control.

FAIL-SAFE FUNCTION:
If either of the shift solenoid valve circuits has an open or short failure, the ECM turns the other shift solenoid "ON" and "OFF" in order to shift into the gear positions shown in the table below.
When a short circuit occurs, the ECM cuts the supply of current to the short circuited solenoid.
Even if starting the engine again in fail-safe mode, the gear position remains in the same position.
X: Malfunctions

Position
NORMAL
SHIFT SOLENOID S1 MALFUNCTIONING
SHIFT SOLENOID S2 MALFUNCTIONING
BOTH SOLENOIDS MALFUNCTIONING
Solenoid valve
Gear
Solenoid valve
Gear
Solenoid valve
Gear
Gear when shift selector is manually operated
S1
S2
S1
S2
S1
S2
D
ON
OFF
1st
X
ON
3rd
ON
X
1st
4th
ON
ON
2nd
X
ON
3rd
OFF
X
4th
4th
OFF
ON
3rd
X
ON
3rd
OFF
X
4th
4th
OFF
OFF
4th
X
OFF
4th
OFF
X
4th
4th
3
ON
OFF
1st
X
ON
3rd
ON
X
1st
4th
ON
ON
2nd
X
ON
3rd
OFF
X
4th
4th
OFF
ON
3rd
X
ON
3rd
OFF
X
4th
4th
2
ON
OFF
1st
X
ON
3rd
ON
X
1st
3rd
ON
ON
2nd
X
ON
3rd
OFF
X
3rd
3rd
L
ON
OFF
1st
X
OFF
1st
ON
X
1st
1st