Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK/CLEAR


    G035612E05
  1. Check DTCs using the intelligent tester.

    1. Turn the ignition switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the ignition switch to the ON position.

    4. Read DTCs on the tester screen.

  2. Clear the DTCs using the intelligent tester.

    1. Turn the ignition switch off.

    2. Turn the ignition switch to the ON position.

    3. Clear the DTCs by following the prompts on the tester screen.

      HINT:
      1. The intelligent tester has a "Snapshot" function which records the monitored data.
      2. Refer to the intelligent tester operator's manual for further details.