Home › ENGINE ยท 1GR-FE › ENGINE CONTROL SYSTEM › ECM

ECM > INSTALLATION

for Preparation Click here



1. INSTALL ECM BRACKET NO.2

Torque:
3 N*m{ 32 kgf*cm , 28 in.*lbf }



2. INSTALL ECM BRACKET

Torque:
3 N*m{ 32 kgf*cm , 28 in.*lbf }



3. INSTALL ECM

Torque:
5 N*m{ 51 kgf*cm , 44 in.*lbf }



4. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER RH


    B085787E01
  1. Engage the 2 clips and install the instrument panel lower finish panel sub-assembly RH.

  1. Install the bolt <B>.



5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    B085815E01
  1. Install the glow compartment door assembly with 3 hinges, holding it horizontal.



    B085785E01
  1. Slightly deform the upper part of the glove compartment door assembly, and install the glove compartment door assembly.

  1. Install the glove compartment door stopper onto the glove compartment door.



6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }