Home › ENGINE · 1GR-FE › ENGINE CONTROL SYSTEM › CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


A095415E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Tester Connection
      Specified Condition
      1 (+B) - 2 (GND)
      6.9 to 7.9 Ω at 20°C (68°F)

      If the result is not as specified, replace the camshaft timing oil control valve.



    A076909E02
  1. Check the operation.

    1. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, and check that the valve operates.

      NOTICE:
      Check that the spool valve is not stuck.

      HINT:
      The spool valve may not return if foreign objects are caught in it. This may cause subtle pressure leakage to the advance side, and a DTC may, be set.