Home › ENGINE · 1GR-FE › ENGINE CONTROL SYSTEM › KNOCK SENSOR (for 2WD)

KNOCK SENSOR (for 2WD) > INSPECTION

for Preparation Click here



1. INSPECT KNOCK SENSOR


A093606E03
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Resistance Standard:
      Tester Connection
      Specified Condition
      1 (Ground) - 2 (Output)
      120 to 180 Ω at 20°C (68°F)

      If the result is not as specified, replace the knock sensor.