EXHAUST PIPE > INSTALLATION |
| 1. INSTALL EXHAUST PIPE ASSEMBLY FRONT |
Install a new gasket onto the exhaust manifold RH.
Install the exhaust front pipe with the new 2 nuts.
| 2. INSTALL EXHAUST FRONT PIPE ASSEMBLY NO.2 |
Install a new gasket onto the exhaust manifold LH.
Install a new gasket onto the exhaust front pipe.
Install the exhaust front pipe No. 2 onto the insulator.
Install the exhaust front pipe No. 2 onto the exhaust manifold LH with the new 2 nuts.
Install the exhaust front pipe No. 2 onto the exhaust front pipe with the 2 bolts and 2 nuts.
![]() |
Install a new gasket onto the exhaust front pipe No. 2.
Using a wooden block and plastic- faced hammer, tap in a new gasket until it is flush with the exhaust front pipe No. 2.
| 3. INSTALL EXHAUST PIPE ASSEMBLY CENTER |
![]() |
Check the free length.
Using vernier calipers, measure the free length of the compression spring.
Install the exhaust tail pipe onto the 4 insulators.
Install the exhaust pipe center onto the exhaust front pipe No. 2 with the 2 bolts and 2 springs.
| 4. INSTALL HEATED OXYGEN SENSOR |
Using SST, install the 2 heated oxygen sensors onto the exhaust pipe.

Connect the 2 heated oxygen sensor connectors.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. CHECK FOR EXHAUST GAS LEAKAGE |