EXHAUST PIPE > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE HEATED OXYGEN SENSOR |
Disconnect the 2 heated oxygen sensor connectors.
Remove the 2 heated oxygen sensors from the exhaust pipe.

| 3. REMOVE EXHAUST PIPE ASSEMBLY CENTER |
Remove the 2 bolts and 2 compression springs, then separate the exhaust pipe center.
Separate the 4 insulators from the exhaust tail pipe, then remove the exhaust pipe center.
| 4. REMOVE EXHAUST FRONT PIPE ASSEMBLY NO.2 |
Remove the 2 bolts and 2 nuts, then separate the exhaust front pipe No. 2 from the exhaust front pipe.
Remove the 2 nuts, then separate the exhaust front pipe No. 2 from the exhaust manifold LH.
Separate the insulator, then remove the exhaust front pipe No. 2.
| 5. REMOVE EXHAUST PIPE ASSEMBLY FRONT |
Remove the 2 nuts, then remove the exhaust front pipe.