ENGINE IMMOBILISER SYSTEM > DIAGNOSIS SYSTEM |
| DESCRIPTION |
The ECM controls the vehicle's immobiliser system functions. immobiliser system data and the DTCs can be read through the vehicle's DLC3. In some cases, a malfunction may be occurring in the immobiliser system even though the security indicator light is not illuminated. When the system seems to be malfunctioning, use the intelligent tester to check for a malfunctions and perform repairs.
| CHECK DLC3 |
![]() |
| Symbols (Terminals No.) | Terminal Description | Condition | Specified Condition |
| SIL (7) - SG (5) | Bus "+" line | During transmission | Pulse generation |
| CG (4) - Body ground | Chassis ground | Always | Below 1 Ω |
| SG (5) - Body ground | Signal ground | Always | Below 1 Ω |
| BAT (16) - Body ground | Battery positive | Always | 11 to 14 V |
![]() |
| INSPECT BATTERY VOLTAGE |