IGNITION COIL > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE V-BANK COVER |
![]() |
Remove the 2 nuts, then remove the V-bank cover.
| 3. REMOVE AIR CLEANER ASSEMBLY |
![]() |
Disconnect the ventilation hose No. 2.
![]() |
Disconnect the vacuum hose.
Disconnect the mass air flow meter connector.
Remove the 2 wire harness clamps.
![]() |
Loosen the 2 hose clamps.
Remove the 2 bolts, then remove the air cleaner.
| 4. DISCONNECT VENTILATION HOSE |
![]() |
Disconnect the ventilation hose from the intake air surge tank.
| 5. REMOVE IGNITION COIL ASSEMBLY |
![]() |
Disconnect the 6 connectors.
Remove the 6 bolts, then remove the 6 ignition coils.