Home › BODY ELECTRICAL › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM

POWER DOOR LOCK CONTROL SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION
  1. The power door lock system locks/unlocks all the doors simultaneously.

    1. The master switch and the door control switch (on the passenger side door) send lock/unlock request signals to the multiplex network body ECU. Then, the multiplex network body ECU transmits these requests to the lock motors in each door to lock/unlock all the doors simultaneously.
    2. Operating the driver side and passenger side door locks using a key sends lock/unlock request signals to the multiplex network body ECU. The driver side door key-linked lock function has an optional unlock method called the "2-step unlock function." Refer to the chart below in step (b) for details on this function.

  2. The power door lock control system has the following functions:

    Function
    Description
    Key-linked lock and unlock function
    This function locks/unlocks all doors simultaneously when driver side or passenger side door key cylinder (linked with driver side and passenger side door lock) is turned with key.
    Key lock-in prevention function
    When key is inserted into ignition key cylinder and door lock operation is performed with driver side door open, all doors are unlocked.
    Door control switch* unlock prohibition function
    Performing door lock operation with transmitter or key prohibits the unlock operation by door lock control switch.
    2-step unlock function
    Driver side door can be unlocked by turning key cylinder once; remaining doors can be unlocked by turning key cylinder second time.
    *: Master switch and door control switch (passenger side)