Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › FRONT AIRBAG SENSOR

FRONT AIRBAG SENSOR > REMOVAL

for Preparation Click here


HINT:
Use the same procedures for the RH side and LH side.



1. PRECAUTION


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.


3. REMOVE RADIATOR GRILLE


    B087564E01
  1. Remove the 2 screws.

  1. Using a clip remover, remove the 2 clips.

  1. Disengage the 2 clips and remove the radiator grille.



4. REMOVE FRONT AIRBAG SENSOR


F051302
  1. Remove the 2 bolts and front airbag sensor.

  1. Disconnect the connector from the sensor.