THERMOSTAT > REMOVAL |
| 1. DRAIN ENGINE COOLANT |
Remove the 4 bolts, then remove the engine under cover No. 1. (PRE RUNNER AND 4WD TYPE)
![]() |
Install a vinyl hose onto the radiator side.
![]() |
Install a vinyl hose onto the engine side.
![]() |
Loosen the engine drain plug.
Loosen the radiator drain plug.
Remove the radiator cap and drain coolant.
Drain the coolant from the reservoir tank.
| 2. REMOVE WATER INLET |
![]() |
Remove the bolt and 2 nuts, then remove the water inlet.
Remove the gasket from the timing chain cover.
| 3. REMOVE THERMOSTAT |
![]() |
Remove the thermostat from the timing chain cover.