Home › BRAKE › BRAKE CONTROL › BRAKE ACTUATOR (w/o VSC)

BRAKE ACTUATOR (w/o VSC) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.



3. REMOVE AIR INJECTION CONTROL DRIVER (for 2TR-FE)


F050573
  1. Disconnect the 2 connectors.



    F050574
  1. Remove the 2 bolts and air injection control driver.



4. REMOVE BRAKE ACTUATOR


F050575
  1. Release the connector lock lever.

  1. Disconnect the brake actuator connector.



    F050576
  1. Using SST, disconnect the brake tubes from the brake actuator.

    SST
    09023-00101  



    F050577E01
  1. Use tags or labels to identify the place to reconnect each line.



    F050578
  1. Remove the 3 nuts and brake actuator with bracket.



5. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY


    F050579
  1. Remove the 2 nuts and bracket.