Home › TRANSMISSION ยท A340E AUTOMATIC TRANSMISSION › AUTOMATIC TRANSMISSION SYSTEM

AUTOMATIC TRANSMISSION SYSTEM > TERMINALS OF ECM

for Preparation Click here



C121776E02

HINT:
The standard voltage of each ECM terminal is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition". Use the illustration above as a reference for the ECM terminals.


Standard voltage: 
Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
NSW (E8-30) - E1 (E4-3)
V - BR
Park/neutral switch signal
IG switch ON and shift lever P and N positions
Below 1 V
NSW (E8-30) - E1 (E4-3)
V - BR
Park/neutral switch signal
IG switch ON and shift lever other than P and N positions
10 to 14 V
STP (E7-4) - E1 (E4-3)
L - BR
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
STP (E7-4) - E1 (E4-3)
L - BR
Stop light switch signal
Brake pedal is released
Below 1.5 V
L (E7-9) - E1 (E4-3)
G-Y - BR
L shift position switch signal
IG switch ON and shift lever L position
10 to 14 V
L (E7-9) - E1 (E4-3)
G-Y - BR
L shift position switch signal
IG switch ON and shift lever other than L position
Below 1 V
2 (E7-10) - E1 (E4-3)
R-Y - BR
2 shift position switch signal
IG switch ON and shift lever 2 position
10 to 14 V
2 (E7-10) - E1 (E4-3)
R-Y - BR
2 shift position switch signal
IG switch ON and shift lever other than 2 position
Below 1 V
R (E7-11) - E1 (E4-3)
R-W - BR
R shift position switch signal
IG switch ON and shift lever R position
10 to 14 V
R (E7-11) - E1 (E4-3)
R-W - BR
R shift position switch signal
IG switch ON and shift lever other than R position
Below 1 V
3 (E7-19) - E1 (E4-3)
Y - BR
3 shift position switch signal
IG switch ON and shift lever 3 position
10 to 14 V
3 (E7-19) - E1 (E4-3)
Y - BR
3 shift position switch signal
IG switch ON and shift lever other than 3 position
Below 1 V
D (E7-21) - E1 (E4-3)
L-B - BR
D shift position switch signal
IG switch ON and shift lever D position
10 to 14 V
D (E7-21) - E1 (E4-3)
L-B - BR
D shift position switch signal
IG switch ON and shift lever other than D position
Below 1 V
S2 (E5-8) - E1 (E4-3)
L-W - BR
S2 solenoid signal
2nd or 3rd gear
10 to 14 V
S2 (E5-8) - E1 (E4-3)
L-W - BR
S2 solenoid signal
1st or 4th gear
Below 1 V
S1 (E5-9) - E1 (E4-3)
W-G - BR
S1 solenoid signal
1st or 2nd gear
10 to 14 V
S1 (E5-9) - E1 (E4-3)
W-G - BR
S1 solenoid signal
3rd and 4th gears
Below 1 V
SLU+ (E5-11) - SLU- (E5-10)
V - LG
SLU solenoid signal
3rd (lock-up) or 4th (lock-up) gear
Pulse generation
(See waveform 2)
SLT+ (E5-12) - SLT- (E5-13)
G-B - R-B
SLT solenoid signal
Engine idling speed
Pulse generation
(See waveform 1)
THO1 (E5-24) - E2 (E4-28)
Y-B - BR
ATF temperature sensor signal
ATF temperature: 115 °C (239 °F) or more
Below 1.5 V
NCO+ (E5-34) - NCO- (E5-26)
Y - L
Speed sensor (NCO) signal
Engine idling speed
Pulse generation
(See waveform 3)
SP2+ (E5-35) - SP2- (E5-27)
G - R
Speed sensor (SP2) signal
Vehicle speed 12 mph (20 km/h)
Pulse generation
(See waveform 4)
THOC (E4-22) - E2 (E4-28)
GR - BR
ATF temperature sensor signal
ATF temperature: 115 °C (239 °F) or more
Below 1.5 V

Waveform 1
G023426E09
Item
Content
Terminal
SLT+ (E5-12) - SLT- (E5-13)
Tool setting
5V/DIV, 1ms/DIV
Vehicle condition
Engine idling speed

Waveform 2
G031331E03
Item
Content
Terminal
SLU+ (E5-11) - SLU- (E5-10)
Tool setting
5V/DIV, 1ms/DIV
Vehicle condition
3rd (lock-up) or 4th (lock-up) gear

Waveform 3
G020663E04
Item
Content
Terminal
NCO+ (E5-34) - NCO- (E5-26)
Tool setting
1V/DIV, 2ms/DIV
Vehicle condition
Engine idling speed (P or N position)

Waveform 4
G020664E05
Item
Content
Terminal
SP2+ (E5-35) - SP2- (E5-27)
Tool setting
2V/DIV, 20ms/DIV
Vehicle condition
Vehicle speed 12 mph (20 km/h)