Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › AIRBAG SYSTEM

AIRBAG SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



SRS (SUPPLEMENTAL RESTRAINT SYSTEM) AIRBAG SYSTEM
  1. General Description

    1. The SRS airbag system consists of the following airbag and main components:

      Airbag
      Regular Cab Model
      Access Cab Model
      Double Cab Model
      Driver Airbag
      Standard
      Standard
      Standard
      Front Passenger Airbag
      Standard
      Standard
      Standard
      Side Airbag
      -
      -
      Option
      Curtain Shield Airbag
      -
      -
      Option

      Main Components
      Features
      Center Airbag Sensor Assembly
      1. Controls airbag deployment
      2. Activates dual stage control for driver and front passenger airbags
      3. Detects malfunctions in SRS airbag system
      Occupant Classification ECU
      Determines front passenger seat occupant conditions through occupant classification sensors
      Front Airbag Sensor
      Detect intensity of frontal collisions though electrical deceleration sensor
      Side Airbag Sensor
      Detect intensity of side collision through electrical deceleration sensor
      Curtain Shield Airbag Sensors
      Detect intensity of side rear collision through electrical deceleration sensor
      Occupant Classification Sensors
      Detect occupant weight on front passenger seat
      Seat Position Sensor
      Detects driver seat position
      Seat Belt Buckle Switches
      Detect whether of not seat belt fastened
      Airbag ON/OFF Indicator
      Illuminates ON or OFF light to indicate front and side passenger airbag deployment availability
      SRS Warning Light
      Illuminates to indicate existence of malfunctions in SRS airbag system
      Airbag Cut-Off Switch
      Prohibits deployment of front passenger airbag when switched to OFF


AIRBAG DEPLOYMENT
  1. Front Collisions

    1. The driver and front passenger airbags are in case of frontal collisions. These airbags deploy by dual stage control. In order to activate dual stage control, the center airbag sensor assembly monitors the following information through the components shown in the table below:

      Seat
      Information
      Models with Bench Seat
      Models with Separate Seat
      Driver
      Intensity of Impact
      Front Airbag Sensor (RH or LH)
      Same As Left
      Driver
      Driver Seat Position
      Seat Position Sensor
      Same As Left
      Driver
      Seat Belt Position
      Seat Belt Buckle Switches
      Same As Left
      Front Passenger
      Intensity of Impact
      Front Airbag Sensor (RH or LH)
      Same As Left
      Front Passenger
      Occupant Weight
      Occupant Classification Sensor
      Four Occupant Classification Sensors
      Front Passenger
      Seat Belt Condition
      Seat Belt Buckle Switches
      Same As Left



  2. Side Collisions



    1. The side and curtain shield airbags are in case of side collisions. The side airbags are installed in the seat backs of the driver seat and the front passenger seat, and the curtain shield airbags are installed in the upper areas of the right and left center pillars. If a side airbag sensor detects an impact, the airbag sensor assembly center causes the side and curtain shield airbags to be deployed simultaneously.


      H101814E01



  3. Rear Side Collisions



    1. The curtain shield airbags are in case of rear side collisions. The curtain shield airbags are installed in the upper areas of the right and left center pillars. If a curtain shield airbag sensor detects an impact, the airbag sensor assembly center causes a curtain shield airbag to be deployed.


      H101815E01