OCCUPANT CLASSIFICATION SYSTEM (for Separate Seat Type) > TERMINALS OF ECU |
| OCCUPANT CLASSIFICATION ECU |

| Symbols (Terminal No.) | Wiring Color | Terminal Description | Condition | Specification |
| +B (O5-1) - GND (O5-3) | R - W-B | Battery | Ignition switch on | 10 to 14 V |
| DIA (O5-2) - GND (O5-3) | W - W-B | Diagnosis (DLC3) | Ignition switch on | Pulse generation |
| GND (O5-3) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| FSR- (O5-4) - GND (O5-3) | G-B - W-B | Center airbag sensor assembly communication line (-) | Always | Below 1 Ω |
| BGND (O5-5) - GND (O5-3) | P-G - W-B | Passenger side buckle switch ground line | Always | Below 1 Ω |
| IG (O5-7) - GND (O5-3) | O - W-B | Power source (IGN Fuse) | Ignition switch on | 10 to 14 V |
| FSR+ (O5-8) - FSR- (O5-4) | G-R - G-B | Center airbag sensor assembly communication line | Ignition switch on | Pulse generation |
| BSW (O5-9) - BGND (O5-5) | B - P-G | Passenger side buckle switch line | Buckle switch ON Buckle switch OFF | Pulse generation |
| SGD1 (O4-1) - GND (O5-3) | L - W-B | Occupant classification sensor front LH ground line | Always | Below 1 Ω |
| SGD2 (O4-2) - GND (O5-3) | O - W-B | Occupant classification sensor front RH ground line | Always | Below 1 Ω |
| SGD3 (O4-3) - GND (O5-3) | P-G - W-B | Occupant classification sensor rear LH ground line | Always | Below 1 Ω |
| SGD4 (O4-4) - GND (O5-3) | B-R - W-B | Occupant classification sensor rear RH ground line | Always | Below 1 Ω |
| SVC1 (O4-11) - SGD1 (O4-1) | B-L - L | Occupant classification sensor front LH power supply line | Ignition switch on, a load is applied to occupant classification sensor front LH | 4.5 to 5.1 V |
| SVC2 (O4-12) - SGD2 (O4-2) | LG-B - O | Occupant classification sensor front RH power supply line | Ignition switch on, a load is applied to occupant classification sensor front RH | 4.5 to 5.1 V |
| SVC3 (O4-5) - SGD3 (O4-3) | B-O -P-G | Occupant classification sensor rear LH power supply line | Ignition switch on, a load is applied to occupant classification sensor rear LH | 4.5 to 5.1 V |
| SVC4 (O4-6) - SGD4 (O4-4) | GR-L - B-R | Occupant classification sensor rear RH power supply line | Ignition switch on, a load is applied to occupant classification sensor rear RH | 4.5 to 5.1 V |
| SIG1 (O4-7) - SGD1 (O4-1) | G - L | Occupant classification sensor front LH signal line | Ignition switch on, a load is applied to occupant classification sensor front LH | Pulse generation |
| SIG2 (O4-8) - SGD2 (O4-2) | R-L - O | Occupant classification sensor front RH signal line | Ignition switch on, a load is applied to occupant classification sensor front RH | Pulse generation |
| SIG3 (O4-9) - SGD3 (O4-3) | R-B - P-G | Occupant classification sensor rear LH signal line | Ignition switch on, a load is applied to occupant classification sensor rear LH | Pulse generation |
| SIG4 (O4-10) - SGD4 (O4-4) | L-R - B-R | Occupant classification sensor rear RH signal line | Ignition switch on, a load is applied to occupant classification sensor rear RH | Pulse generation |