Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › OCCUPANT CLASSIFICATION SYSTEM (for Bench Seat Type)

OCCUPANT CLASSIFICATION SYSTEM (for Bench Seat Type) > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK

HINT:
  1. When DTC B1650/23 is detected as a result of troubleshooting the airbag system, troubleshoot the occupant classification system.
  2. Use the intelligent tester to read and clear DTCs, otherwise the DTCs cannot be read and cleared.



    G035612E02
  1. Check for DTCs.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to the ON position.

    3. Check for DTCs by following the prompts on the tester screen.

      HINT:
      When checking the DTCs of the occupant classification ECU, select the OCCUPANT DETECT on the tester screen.

  2. Clear the DTCs.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to the ON position.

    3. Clear the DTCs by following the prompts on the tester screen.

      HINT:
      When clearing the DTCs of the occupant classification ECU, select the OCCUPANT DETECT on the tester screen.