Home › ENGINE ยท 2TR-FE › ENGINE CONTROL SYSTEM › CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


G035612E02
  1. Check the operation.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester ON.

    4. Start the engine and warm it up.

    5. Select the following menu items: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / VVT CTRL B1.

    6. Operate the OCV using the hand-held tester, then check the engine speed.

      Standard:
      Tester Operation
      Specified Condition
      OCV OFF
      Normal engine speed
      OCV ON
      Rough idling engine stalls

      If the operation is not specified, check the camshaft timing oil control valve, wire harness and ECM.