FRONT SEAT ASSEMBLY (for Bench Seat Type) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH |
![]() |
Slide the front seat to the most forward position.
Disengage the hook.
Disconnect the 2 connectors.
Using a clip remover, remove the wiring harness clamp.
Remove the wiring harness clamp.
Remove the bolt and the front seat inner belt.
| 3. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH |
![]() |
Slide the front seat to the most forward position.
Disengage the hook.
Disconnect the connector.
Using a clip remover, remove the wiring harness clamp.
Remove the wiring harness clamp.
Remove the bolt and the front seat inner belt.
| 4. REMOVE FRONT SEAT HEADREST ASSEMBLY |
![]() |
Push in the 2 lock buttons of the 2 front seat headrest supports and remove the 2 front seat headrests.
| 5. REMOVE FRONT SEAT ASSEMBLY |
![]() |
Remove the belt of the front center seat outer belt from the front center seat outer belt guide.
![]() |
Disconnect the 3 connectors.
Using a clip remover, remove the 2 wiring harness clamps.
![]() |
Remove the 4 bolts and the front seat.