Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Bench Seat Type)

FRONT SEAT ASSEMBLY (for Bench Seat Type) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp surfaces on the front seat back spring and the front seat cushion spring could cause injuries to your hands.

NOTICE:
Remove the front seat cushion pad and the front seat cushion cover together, in order to avoid occupant classification sensor malfunctions.



1. REMOVE FRONT CENTER SEAT HEADREST ASSEMBLY


    B121742E01
  1. Push in the lock button of the front seat headrest support and remove the front center seat headrest.



2. REMOVE FRONT SEAT HINGE COVER LH


    B121743
  1. Remove the 2 screws and the front seat hinge cover.



3. REMOVE FRONT SEAT HINGE COVER RH

HINT:
Use the same procedure as for the LH side.



4. REMOVE FRONT SEAT BACK ASSEMBLY


    B121744
  1. Remove the 4 bolts and the front seat back.



5. REMOVE FRONT CENTER SEAT OUTER BELT GUIDE


    B121745
  1. Remove the 2 screws, the pin and the front center seat outer belt guide.



6. REMOVE FRONT SEAT HEADREST SUPPORT


    B121746E01
  1. Remove the 4 pieces of hook tape and open the front seat back cover.

  1. Disengage the 12 claws and remove the 6 front seat headrest supports.



7. REMOVE FRONT SEAT BACK SPRING ASSEMBLY


    B121747E01
  1. Remove the 2 hog rings.

  1. Remove the 2 pieces of hook tape.

  1. Disengage the 4 hooks and remove the front seat back spring.



8. REMOVE FRONT SEAT RECLINING CONTROL CABLE ASSEMBLY


    B121748
  1. Remove the 3 wiring harness clamps.

  1. Loosen the 2 nuts and remove the 2 screw caps.

  1. Remove the 2 casing caps.

  1. Remove the 4 cable ends and the 2 front seat reclining control cables.



9. REMOVE FRONT SEAT BACK COVER


    B121749E01
  1. Remove the 4 hog rings and the 4 wires.

  1. Remove the 4 hog rings and the front seat back cover.



10. REMOVE OCCUPANT CLASSIFICATION ECU


    C123157
  1. Disconnect the connector from the the occupant classification ECU.

  1. Remove the 2 bolts and the occupant classification ECU.



11. REMOVE SEAT POSITION SENSOR PROTECTOR
  1. Remove the seat slide position sensor protector from the seat position airbag sensor.



12. REMOVE SEAT POSITION SENSOR
  1. for Driver Side:

    1. Remove the seat position sensor .

  1. for Front Passenger Side:

    1. Remove the seat position sensor .



13. REMOVE FRONT SEAT TRACK FRONT BRACKET LH


    B121750
  1. Remove the nut, the hook and the front seat track front bracket.



14. REMOVE FRONT SEAT TRACK FRONT BRACKET RH

HINT:
Use the same procedure as for the LH side.



15. REMOVE FRONT SEAT TRACK REAR BRACKET LH


    B121751
  1. Remove the 2 nuts and the front seat track rear bracket.



16. REMOVE FRONT SEAT TRACK REAR BRACKET RH

HINT:
Use the same procedure as for the LH side.



17. REMOVE FRONT SEAT TRACK OUTER ASSEMBLY LH


    B121752
  1. Slide the front seat track outer to the most rearward position.

  1. Using "Torx" socket wrench T40, remove the 2 bolts.

  1. Slide the front seat track outer to the most forward position.

  1. Using "Torx" socket wrench T40, remove the 2 bolts and the front seat track outer.



18. REMOVE FRONT SEAT TRACK OUTER ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



19. REMOVE FRONT SEAT CUSHION SPRING ASSEMBLY


    B121753
  1. Remove the 4 hog rings.

  1. Disengage the 10 hooks and remove the front seat cushion spring.



20. REMOVE OCCUPANT CLASSIFICATION SENSOR


    C121182
  1. Disconnect the connector from the occupant classification sensor.

  1. Remove the wiring harness clamp.

  1. Disengage the clamps from the seat cushion frame.

  1. Remove the 2 clips and the occupant classification sensor.



21. REMOVE SEAT TRACK SPRING


    B121754
  1. Remove the 2 seat track springs.



22. REMOVE FRONT SEAT SLIDE CONTROL CABLE ASSEMBLY


    B121755
  1. Remove the 4 wiring harness clamps.

  1. Loosen the nut and remove the screw cap.

  1. Remove the casing cap.

  1. Remove the 2 cable ends and the front seat slide control cable.



23. REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY LH


    B121756
  1. Remove the nut and the seat track handle.



24. REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY RH


    B121757
  1. Remove the nut and the seat track handle.



25. REMOVE SEAT WIRE


    B121758
  1. Remove the 5 wiring harness clamps.

  1. Using a clip remover, remove the 12 wiring harness clamps and the seat wire.



26. REMOVE FRONT SEAT CUSHION SPRING PROTECTOR


    B121759
  1. Remove the front seat cushion spring protector.