Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for Double Cab)

REAR SEAT INNER BELT ASSEMBLY (for Double Cab) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT INNER BELT ASSEMBLY


    B087604E02
  1. for LH Side:

    1. Install the rear seat inner belt with the bolt.

      Torque:
      42 N*m{ 430 kgf*cm , 31 ft.*lbf }

      NOTICE:
      1. Make sure that the rear seat inner belt is oriented in the correct direction when installing.
      2. Be careful not to place the rear seat inner belt over the convex areas of the floor panel.



    B087239E03
  1. for RH Side:

    1. Install the rear seat belt inner and floor anchor of the rear seat belt outer center with the bolt.

      Torque:
      42 N*m{ 430 kgf*cm , 31 ft.*lbf }

      NOTICE:
      1. Make sure that the rear seat inner belt and floor anchor of the rear center seat outer belt are oriented in the correct direction when installing.
      2. Be careful not to place the rear seat inner belt (and floor anchor of the rear center seat outer belt) over the convex areas of the floor panel.