Home › RESTRAINTS › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY (for Double Cab)

REAR CENTER SEAT OUTER BELT ASSEMBLY (for Double Cab) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT BACK HINGE COVER


    B087216E02
  1. Using a screwdriver with its tip taped in protective tape, disengage the 3 claws and remove the rear seat back hinge cover.

    HINT:
    Follow the same procedures as for the opposite side.



2. REMOVE REAR SEAT BACK BOARD SUB-ASSEMBLY


    B087226E01
  1. Remove the 3 screws.

  1. Disengage the 5 claws and remove the rear seat back board.



3. REMOVE REAR SEAT SHOULDER BELT COVER


    B087228E02
  1. Using a screwdriver with its tip taped with protective tape, disengage the 4 claws and remove the rear seat shoulder belt cover.



4. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY


    B087215E01
  1. Remove the bolt, floor anchor of the rear center seat outer belt and rear seat inner belt.



    B087600E01
  1. Insert the belt through the hole into the rear seat back frame.

  1. Remove the bolt and rear center seat outer belt.