Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Bench Seat Type)

FRONT SEAT INNER BELT ASSEMBLY (for Bench Seat Type) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH


    B121779E01
  1. Slide the front seat to the most forward position.

  1. Install the front seat inner belt with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Be careful not to place the front seat inner belt over the convex areas of the floor panel.

  1. Install the 2 wiring harness clamps.

  1. Connect the 2 connectors.

  1. Engage the hook.



2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH


    B121780E01
  1. Slide the front seat to the most forward position.

  1. Install the front seat inner belt with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Be careful not to place the front seat inner belt over the convex areas of the floor panel.

  1. Install the 2 wiring harness clamps.

  1. Connect the connector.

  1. Engage the hook.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }