Home › BODY › SEAT › REAR SEAT ASSEMBLY (for LH Side)

REAR SEAT ASSEMBLY (for LH Side) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT BACK CENTER HINGE SUB-ASSEMBLY


    B087197E01
  1. Install the rear seat back center hinge with the 2 bolts.

    Torque:
    18 N*m{ 185 kgf*cm , 14 ft.*lbf }



2. INSTALL LUGGAGE COMPARTMENT SIDE TRAY


    B087579E01
  1. Engage the 8 claws and 3 clips, and install the luggage compartment side tray.

  1. Tighten the 3 bolts.



3. INSTALL REAR SEAT BACK HINGE SUB-ASSEMBLY


    B087196E01
  1. Install the rear seat back hinge with the 2 bolts.

    Torque:
    18 N*m{ 185 kgf*cm , 14 ft.*lbf }



4. INSTALL REAR SEAT BACK ASSEMBLY LH


    B087195E01
  1. Install the rear seat back with the 2 bolts.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



5. INSTALL REAR SEAT BACK ASSEMBLY RH


    B087217
  1. Install the rear seat back with the 2 bolts.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



    B087239E03
  1. Install the rear seat belt inner and rear seat belt outer center of the floor anchor with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    1. Make sure that the rear seat inner belt and floor anchor of the rear center seat outer belt are oriented in the correct direction when installing.
    2. Be careful not to place the rear seat inner belt (and floor anchor of the rear center seat outer belt) over the convex areas of the floor panel.



6. INSTALL REAR SEAT BACK HINGE COVER


    B087211E01
  1. for LH Side:

    HINT:
    Follow the same procedures as for the opposite side.


    1. Engage the 3 claws and install the rear seat back hinge cover.

  1. for RH Side:

    1. Remove the rear seat back hinge cover .



7. INSTALL REAR SEAT CUSHION ASSEMBLY


    B087193E01
  1. Install the rear seat cushion with the 2 bolts.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }