Home › BODY › SEAT › REAR SEAT ASSEMBLY (for RH Side)

REAR SEAT ASSEMBLY (for RH Side) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT BACK HINGE SUB-ASSEMBLY


    B087218E01
  1. Install the rear seat back hinge with the 2 bolts.

    Torque:
    18 N*m{ 185 kgf*cm , 14 ft.*lbf }



2. INSTALL REAR SEAT BACK ASSEMBLY


    B087217
  1. Install the rear seat back with the 2 bolts.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



    B087239E03
  1. Install the rear seat belt inner and rear seat belt outer center of the floor anchor with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    1. Make sure that the rear seat inner belt and floor anchor of the rear center seat outer belt are oriented in the correct direction when installing.
    2. Be careful not to place the rear seat inner belt (and floor anchor of the rear center seat outer belt) over the convex areas of the floor panel.



3. INSTALL REAR SEAT BACK HINGE COVER


B087238E01

HINT:
Follow the same procedures as for the opposite side.

  1. Lock the 3 claws and install the rear seat back hinge cover.



4. INSTALL REAR SEAT CUSHION ASSEMBLY


    B087214E01
  1. Install the rear seat cushion with the 2 bolts.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }