Home › BODY › SEAT › REAR SEAT ASSEMBLY (for RH Side)

REAR SEAT ASSEMBLY (for RH Side) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT CUSHION ASSEMBLY


    B087214E01
  1. Remove the 2 bolts and rear seat cushion.



2. REMOVE REAR SEAT BACK HINGE COVER


    B087216E02
  1. Using a screwdriver with its tip taped in protective tape, disengage the 3 claws and remove the rear seat back hinge cover.

    HINT:
    Follow the same procedures as for the opposite side.



3. REMOVE REAR SEAT BACK ASSEMBLY


    B087215E01
  1. Remove the bolt, rear seat belt outer center and floor anchor of the rear seat belt inner.



    B087217E01
  1. Remove the 2 bolts and rear seat back.



4. REMOVE REAR SEAT BACK HINGE SUB-ASSEMBLY


    B087218E01
  1. Remove the 2 bolts and rear seat back hinge.