BLOWER RESISTOR > INSPECTION |
| 1. INSPECT BLOWER RESISTOR |
![]() |
Check the resistance.
Using an ohmmeter, measure the resistance between the terminals.
| Tester Connection | Specified Condition |
| 1 (M1) - 3 (COMMON) | 0.792 to 0.968 Ω at 20°C (68°F) |
| 2 (M2) - 3 (COMMON) | 0.342 to 0.418 Ω at 20°C (68°F) |
| 4 (Lo) - 3 (COMMON) | 2.07 to 2.53 Ω at 20°C (68°F) |