Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CLUTCH SWITCH

CLUTCH SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL CLUTCH SWITCH ASSEMBLY


    E076136E01
  1. Install the clutch switch assembly and tighten the nut.

  1. Connect the connector.



2. INSTALL DRIVER SIDE JUNCTION BLOCK


    E076135E01
  1. Install the driver side junction block assembly with the 2 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Install the bracket with the 2 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


B085780E01
  1. Connect the connectors.

  1. Engage the 3 clips and install the lower NO. 1 instrument panel finish panel sub-assembly.

  1. Install the 2 bolts <B>.



4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


B088394
  1. Connect the hood lock control cable assembly.



    B088397E01
  1. Engage the 2 claws and install the hood lock control lever sub-assembly.



5. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake)


    B085767E01
  1. Engage the 4 clips and install the instrument panel hole cover.



6. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake)


    B085766E01
  1. Engage the 4 clips and 2 claws, and install the instrument panel under tray.



7. INSTALL COWL SIDE TRIM BOARD LH (for Regular Cab)


    B087438E01
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



8. INSTALL COWL SIDE TRIM BOARD LH (for Access Cab)


    B087438E01
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



9. INSTALL COWL SIDE TRIM BOARD LH (for Double Cab)


    B087438E01
  1. Remove the clip.

  1. Disengage the 2 clips and remove the cowl side trim board.



10. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab)


    B087476E01
  1. Engage the 8 claws and clip, and install the front door scuff plate.



11. INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab)


    B087436E01
  1. Engage the 9 claws and clip, and install the front door scuff plate.



12. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab)


    B087411E01
  1. Engage the 9 claws and install the front door scuff plate.



13. INSTALL FRONT FLOOR FOOTREST


    B087437E01
  1. Engage the 2 clips and install the front floor footrest.



14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }