Home › BODY ELECTRICAL › METER › COMBINATION METER

COMBINATION METER > INSTALLATION

for Preparation Click here



1. INSTALL COMBINATION METER ASSEMBLY


B085782E01
  1. Connect the 2 connectors.

  1. Install the combination meter assembly with the 4 screws.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


B085781E01
  1. Connect the connectors.

  1. Engage the 6 clips and install the instrument cluster finish panel sub-assembly.

  1. Install the 2 clips.



3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


B085780E01
  1. Connect the connectors.

  1. Engage the 3 clips and install the lower NO. 1 instrument panel finish panel sub-assembly.

  1. Install the 2 bolts <B>.



4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


B088394
  1. Connect the hood lock control cable assembly.



    B088397E01
  1. Engage the 2 claws and install the hood lock control lever sub-assembly.



5. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake)


    B085767E01
  1. Engage the 4 clips and install the instrument panel hole cover.



6. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake)


    B085766E01
  1. Engage the 4 clips and 2 claws, and install the instrument panel under tray.



7. INSTALL COWL SIDE TRIM BOARD LH (for Regular Cab)


    B087438E01
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



8. INSTALL COWL SIDE TRIM BOARD LH (for Access Cab)


    B087438E01
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



9. INSTALL COWL SIDE TRIM BOARD LH (for Double Cab)


    B087438E01
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



10. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab)


    B087476E01
  1. Engage the 8 claws and clip, and install the front door scuff plate.



11. INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab)


    B087436E01
  1. Engage the 9 claws and clip, and install the front door scuff plate.



12. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab)


    B087411E01
  1. Engage the 9 claws and install the front door scuff plate.



13. INSTALL FRONT FLOOR FOOTREST


    B087437E01
  1. Engage the 2 clips and install the front floor footrest.



14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }