Home › SUSPENSION & AXLE › SUSPENSION › FRONT SHOCK ABSORBER WITH COIL SPRING (for 4WD and Pre-Runner)

FRONT SHOCK ABSORBER WITH COIL SPRING (for 4WD and Pre-Runner) > INSPECTION

for Preparation Click here



1. INSPECT SHOCK ABSORBER ASSEMBLY FRONT


C099163
  1. Compress and extend the shock absorber rod and check that there is no abnormal resistance or unusual sound during operation.
    If there is any abnormality, replace the shock absorber front with a new one.

    NOTICE:
    When disposing of the shock absorber front, see DISPOSAL on page Click here.