FRONT LOWER SUSPENSION ARM (for 4WD and Pre-Runner) > INSTALLATION |
| 1. TEMPORARILY TIGHTEN FRONT SUSPENSION LOWER ARM |
![]() |
Align the matchmarks on the camber adjust cam No. 2 and toe adjust cam. Temporarily tighten the bolt and the nut.
Install the front lower ball joint attachment, a new nut and a new cotter pin.
![]() |
Install the front lower ball joint attachment with the 2 bolts.
| 2. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING |
![]() |
Install the front shock absorber with coil spring, bolt and washer, and temporarily tighten the nut.
| 3. INSTALL FRONT WHEEL |
| 4. STABILIZE SUSPENSION |
Jack down the vehicle.
Bounce the vehicle up and down several times to stabilize the suspension.
| 5. FULLY TIGHTEN FRONT SUSPENSION LOWER ARM |
![]() |
Fully tighten the bolt and the nut.
| 6. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING |
![]() |
Fully tighten the nut.
| 7. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT |