Home › SUSPENSION & AXLE › SUSPENSION › REAR STABILIZER BAR (for Sport Suspension Package)

REAR STABILIZER BAR (for Sport Suspension Package) > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. REMOVE REAR STABILIZER LINK ASSEMBLY LH


F051244
  1. Remove the 2 nuts and stabilizer link (LH side).

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.



3. REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT:
The removal procedure for the RH side is the same as that for the LH side.



4. REMOVE REAR STABILIZER BAR


F051245
  1. Remove the 4 bolts, 2 stabilizer brackets and stabilizer bar.

  1. Remove the 2 stabilizer bushes from the stabilizer bar.