Home › SUSPENSION & AXLE › SUSPENSION › REAR SHOCK ABSORBER

REAR SHOCK ABSORBER > INSTALLATION

for Preparation Click here



1. INSTALL REAR SHOCK ABSORBER


F051242
  1. Install the 3 cushion retainers, cushion No. 1, cushion No. 3 and shock absorber with a new nut.



    F051241
  1. Install the shock absorber with the bolt, nut and washer.



    F051242
  1. Fully tighten the nut.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }



2. INSTALL REAR WHEEL

Torque:
113 N*m{ 1,152 kgf*cm , 83 ft.*lbf }



3. STABILIZE SUSPENSION
  1. Jack down the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



4. FULLY TIGHTEN REAR SHOCK ABSORBER


F051241
  1. Fully tighten the nut.

    Torque:
    100 N*m{ 1,020 kgf*cm , 74 ft.*lbf }