Home › SUSPENSION & AXLE › SUSPENSION › REAR SHOCK ABSORBER

REAR SHOCK ABSORBER > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. REMOVE REAR SHOCK ABSORBER


F051241
  1. Support the rear axle housing.

  1. Remove the bolt, nut and washer.

  1. for 2WD:

    1. Separate the shock absorber from the rear spring seat.

  1. for 4WD and Pre-Runner:

    1. Separate the shock absorber from the rear axle housing.



    F051242
  1. Remove the nut, 3 cushion retainers, cushion No. 1, cushion No. 3 and shock absorber.