EXTENSION HOUSING REAR OIL SEAL > REMOVAL |
| 1. REMOVE PROPELLER WITH/CENTER BEARING SHAFT ASSEMBLY |
![]() |
Place matchmarks on the propeller shaft flange and differential.
Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft.
![]() |
Remove the 2 center support bearing bolts from the frame crossmember.
![]() |
Place matchmarks on the propeller shaft flange and transfer flange.
Remove the 4 nuts, 4 washers and front propeller shaft.
| 2. DRAIN AUTOMATIC TRANSMISSION FLUID |
Remove the drain plug, gasket and drain ATF.
Install a new gasket and drain plug.
| 3. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL |
![]() |
Using SST, remove the oil seal.