Home › TRANSMISSION ยท A750E AUTOMATIC TRANSMISSION › FLOOR SHIFT ASSEMBLY

FLOOR SHIFT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Separate Seat Type)


    B085768E01
  1. Remove the shift knob.

  1. Disengage the 6 clips and claw, and remove the console upper rear panel sub-assembly.



2. REMOVE REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type)


    B085771E01
  1. Remove the console box carpet.



    B085772E01
  1. Remove the 2 screws <F> and 2 bolts <B>.

  1. Disengage the 4 claws and remove the rear console box assembly.



3. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY (for Separate Seat Type)


    B085773E01
  1. Disengage the 2 clips and 4 claws, and remove the instrument panel cup holder tray.



4. REMOVE FRONT CONSOLE BOX (for Separate Seat Type)


    B085777E01
  1. Remove the 2 screws <F>.

  1. Disengage the 2 clips and claw, and remove the front console box.



5. REMOVE FRONT CONSOLE BOX (for Bench Seat Type)


    B085810E01
  1. Remove the shift knob.

  1. Remove the box bottom mat.

  1. Remove the instrument panel cup holder.

  1. Remove the No. 2 box bottom mat.



    B085812E01
  1. Remove the clip and 2 bolts <A>.

  1. Disengage the 2 clips and claw, and remove the front console box.



6. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


F050833
  1. CABLE TYPE:

    1. Disconnect the transmission control cable assembly from the shift lever assembly.

    2. Remove the clip and disconnect the transmission control cable.



7. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY


F051629
  1. ROD TYPE:

    1. Remove the nut, then separate the floor shift gear shifting rod.



8. REMOVE FLOOR SHIFT ASSEMBLY


F051622
  1. Disconnect the 2 connectors and 2 clamps.

  1. Remove the 4 bolts and floor shift assembly.