TRANSMISSION CONTROL CABLE > REMOVAL |
| 1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
![]() |
Remove the shift knob.
Disengage the 6 clips and claw, and remove the console upper rear panel sub-assembly.
| 2. REMOVE CONSOLE BOX ASSEMBLY REAR |
![]() |
Remove the console box carpet.
![]() |
Remove the 2 screws <F> and 2 bolts <B>.
Disengage the 4 claws and remove the rear console box assembly.
| 3. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY |
![]() |
Disengage the 2 clips and 4 claws, and remove the instrument panel cup holder tray.
| 4. REMOVE CONSOLE BOX FRONT |
![]() |
Remove the 2 screws <F>.
Disengage the 2 clips and claw, and remove the front console box.
| 5. REMOVE VOLTAGE INVERTER ASSEMBLY (w/ Voltage Inverter) |
![]() |
Remove the 6 bolts.
![]() |
Disconnect the 2 connectors and remove the 2 wire harness clamps.
| 6. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() |
Disconnect the transmission control cable assembly from the shift lever assembly.
Remove the clip and disconnect the transmission control cable.
![]() |
Remove the 2 nuts and disconnect the transmission control cable assembly from the body.
![]() |
Remove the nut and disconnect the transmission control cable assembly from the body.
![]() |
Remove the clip and transmission control cable bracket.
Remove the nut and transmission control cable assembly.