VALVE BODY ASSEMBLY > INSTALLATION |
| 1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY |
![]() |
Install the shift solenoid valve S2 with the bolt.
Install the shift solenoid valve S1 with the bolt.
Install the shift solenoid valve SR with the 2 bolts.
Install the shift solenoid valves SLU and SL2 with the pin, lock plate and bolt.
Install the shift solenoid valves SLT and SL1 with the pin, lock plate and bolt.
![]() |
Insert the pin of the lever into the hole of the manual valve.
Install 3 new drum seal gaskets onto the transmission case.
![]() |
Install the 19 bolts.
| 2. INSTALL TRANSMISSION WIRE |
![]() |
Connect the 7 connectors to the solenoid valves.
Install the clamp with the bolt.
Connect the ATF temperature sensor.
| 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
![]() |
Install a new O-ring and the oil strainer with the 4 bolts.
| 4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY |
Install a new gasket and the oil pan sub-assembly.
![]() |
Install the oil pan with the 20 bolts.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. PERFORM INITIALIZATION |
| 7. ADD AUTOMATIC TRANSMISSION FLUID |