Home › DRIVE LINE › PROPELLER SHAFT › REAR PROPELLER SHAFT ASSEMBLY (for Access Cab 4WD and Double Cab 4WD)

REAR PROPELLER SHAFT ASSEMBLY (for Access Cab 4WD and Double Cab 4WD) > REMOVAL

for Preparation Click here



1. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY


C060588E01
  1. Place matchmarks on the propeller shaft flange and differential.

  1. Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft.



    D033912
  1. Remove the 2 center support bearing bolts from the frame crossmember.



    C098709E02
  1. Place matchmarks on the propeller shaft flange and transfer flange.

  1. Remove the 4 nuts, 4 washers and front propeller shaft.