Home › DRIVE LINE › PROPELLER SHAFT › REAR PROPELLER SHAFT ASSEMBLY (for Regular Cab 4WD)

REAR PROPELLER SHAFT ASSEMBLY (for Regular Cab 4WD) > REMOVAL

for Preparation Click here



1. REMOVE PROPELLER SHAFT ASSEMBLY


C060588E01
  1. Place matchmarks on the propeller shaft flange and differential flange.

  1. Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft.



    C098709E02
  1. Place matchmarks on the propeller shaft flange and transfer flange.

  1. Remove the 4 nuts, 4 washers and front propeller shaft.