RADIO SETTING CONDENSER (for 2TR-FE) > INSTALLATION |
| 1. INSTALL RADIO SETTING CONDENSER |
![]() |
Disconnect the connector.
Remove the tape and the radio setting condenser.
| 2. INSTALL AIR CLEANER ASSEMBLY |
![]() |
Install the intake air connector with the 3 bolts.
Tighten the 2 hose clamp bolts.
![]() |
Connect the vacuum hose.
![]() |
Connect the ventilation hose No. 2.
![]() |
Connect the vacuum hose.
Engage the wire harness clamp.
Connect the pressure sensor connector.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |