RADIO SETTING CONDENSER (for 2TR-FE) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE AIR CLEANER ASSEMBLY |
![]() |
Disconnect the pressure sensor connector.
Disengage the wire harness clamp.
Disconnect the vacuum hose.
![]() |
Disconnect the No. 2 ventilation hose.
![]() |
Disconnect the vacuum hose.
![]() |
Loosen the 2 hose clamp bolts.
Remove the 3 bolts, then remove the intake air connector.
| 3. REMOVE RADIO SETTING CONDENSER |
![]() |
Disconnect the connector.
Remove the tape and the radio setting condenser.