REAR SPEAKER (for Access Cab) > INSTALLATION |
| 1. INSTALL REAR SPEAKER ASSEMBLY |
![]() |
Install the rear speaker assembly with the 3 screws.
Connect the connector.
| 2. INSTALL REAR ACCESS PANEL WEATHERSTRIP LH |
![]() |
Install the rear access panel weatherstrip LH.
| 3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY |
![]() |
Install the rear door trim board sub-assembly LH.
![]() |
Install the door pull handle with the screw.
![]() |
Install the access panel inside handle bezel LH with the screw.
Close the cover.
![]() |
Install the outer front seat belt assembly LH (floor side) with the bolt.
| 4. INSTALL LAP BELT OUTER ANCHOR COVER |
![]() |
Engage the 3 claws and install the lap belt outer anchor cover.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |