Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR SPEAKER (for Double Cab)

REAR SPEAKER (for Double Cab) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the RH and LH sides.
  2. The procedures listed below are for the LH side.



1. INSTALL REAR SPEAKER ASSEMBLY


E075952E05
  1. Install the rear speaker assembly with the 3 screws.

  1. Connect the connector.



2. INSTALL REAR DOOR INSIDE HANDLE SUB-ASSEMBLY LH


B088075
  1. Connect the 2 cables to the rear door inside handle sub-assembly LH.



    B088790E01
  1. Engage the 3 claws and install the rear door inside handle sub-assembly LH onto the door panel.



3. INSTALL REAR DOOR TRIM PANEL ASSEMBLY LH


B088073E01
  1. Engage the 9 clips and install the rear door trim panel assembly LH.

  1. Install the door assist grip assembly LH with the screw.



4. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B088070
  1. Connect the connector.



    B088069E01
  1. Engage the 2 claws and install the rear power window regulator switch assembly.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }