VOLTAGE INVERTER > INSTALLATION |
| 1. INSTALL VOLTAGE INVERTER ASSEMBLY |
![]() |
Connect the 2 connectors and install the 2 wire harness clamps.
![]() |
Install the 6 bolts.
| 2. INSTALL REAR CONSOLE BOX ASSEMBLY |
![]() |
Engage the 4 claws and install the console box rear.
Install the 2 screws <F> and 2 bolts <B>.
![]() |
Install the console box carpet.
| 3. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
![]() |
Engage the 4 clips and claw, and remove the console upper panel sub-assembly.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |