VOLTAGE INVERTER > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
![]() |
Remove the shift knob.
Disengage the 6 clips and claw, and remove the console upper rear panel sub-assembly.
| 3. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() |
Remove the console box carpet.
![]() |
Remove the 2 screws <F> and 2 bolts <B>.
Disengage the 4 claws and remove the rear console box assembly.
| 4. REMOVE VOLTAGE INVERTER ASSEMBLY |
![]() |
Remove the 6 bolts.
![]() |
Disconnect the 2 connectors and remove the 2 wire harness clamps.