CIGARETTE LIGHTER > INSTALLATION |
| 1. INSTALL CIGARETTE LIGHTER ASSEMBLY |
Align the socket with the notch on the cigarette lighter bezel stay, and push the cigarette lighter assembly firmly into the cover to install it.
Install the cigarette lighter knob and element assembly.
| 2. INSTALL CIGARETTE LIGHTER COVER |
![]() |
Engage the 2 claws and install the cigarette lighter cover.
| 3. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY |
![]() |
Connect the 2 connectors.
Engage the 5 clips and install the instrument lower cover.
Install the bolt <B>.
| 4. INSTALL LOWER INSTRUMENT PANEL LH |
![]() |
Install the lower instrument panel LH with the 3 bolts <B>.
| 5. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY |
![]() |
Engage the 10 clips and install the instrument cluster center finish panel sub-assembly.
| 6. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
![]() |
Connect the connectors.
Engage the 6 clips and install the instrument cluster finish panel sub-assembly.
Install the 2 clips.
| 7. INSTALL NO. 1 LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Connect the connectors.
Engage the 3 clips and install the lower NO. 1 instrument panel finish panel sub-assembly.
Install the 2 bolts <B>.
| 8. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Connect the hood lock control cable assembly.
![]() |
Engage the 2 claws and install the hood lock control lever sub-assembly.
| 9. INSTALL RADIO RECEIVER ASSEMBLY |
![]() |
Connect the connector.
Install the radio receiver assembly with bracket with the 4 bolts.
| 10. INSTALL AIR CONDITIONING CONTROL ASSEMBLY |
![]() |
Connect the 2 connectors.
Engage the 4 clips and install the air conditioning control assembly.
| 11. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type) |
![]() |
Engage the 2 clips and claw, and install the front console box.
Install the clip and 2 bolts <A>.
![]() |
Install the No. 2 box bottom mat.
Install the instrument panel cup holder.
Install the box bottom mat.
Install the shift knob.
| 12. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type) |
![]() |
Engage the 2 clips and claw, and install the front console box.
Install the clip and 2 bolts <A>.
![]() |
Install the No. 2 box bottom mat.
Install the instrument panel cup holder.
Install the box bottom mat.
Install the shift knob.
| 13. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type) |
![]() |
Engage the 2 clips and claw, and install the front console box.
Install the 2 screws <F>.
Install the shift knob.
| 14. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type) |
![]() |
Engage the 2 clips and claw, and install the front console box.
Install the 2 screws <F>.
| 15. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type) |
![]() |
Engage the 2 clips and 4 claws, and install the instrument panel cup holder tray.
| 16. INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) |
![]() |
Engage the 4 claws and install the console box rear.
Install the 2 screws <F> and 2 bolts <B>.
![]() |
Install the console box carpet.
| 17. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type) |
![]() |
Engage the 4 clips and claw, and remove the console upper panel sub-assembly.
| 18. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) |
![]() |
Engage the 6 clips and claw, and remove the console upper rear panel.
Install the shift knob.
| 19. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) |
![]() |
Engage the 4 clips and install the instrument panel hole cover.
| 20. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) |
![]() |
Engage the 4 clips and 2 claws, and install the instrument panel under tray.
| 21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |