NO. 1 SPEAKER WITH BOX > INSTALLATION |
| 1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY |
![]() |
Using a torx socket wrench T20, install the 4 screws and the stereo component amplifier assembly.
| 2. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX |
![]() |
Install the No. 1 speaker assembly with box with the 4 bolts.
![]() |
Connect the connector.
Install the clamp.
| 3. INSTALL LUGGAGE COMPARTMENT SIDE TRAY |
![]() |
Engage the 8 claws and 3 clips, and install the luggage compartment side tray.
Tighten the 3 bolts.
| 4. INSTALL REAR SEATBACK ASSEMBLY LH |
![]() |
Install the rear seat back with the 2 bolts.
| 5. INSTALL REAR SEATBACK ASSEMBLY RH |
![]() |
Install the rear seat back with the 2 bolts.
![]() |
Install the rear seat belt inner and rear seat belt outer center of the floor anchor with the bolt.
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |