Home › BODY ELECTRICAL › OTHER SYSTEM › POWER OUTLET SOCKET

POWER OUTLET SOCKET > INSTALLATION



1. INSTALL POWER OUTLET SOCKET ASSEMBLY


E075989E01
  1. Install the clamp.

  1. Connect the connector.



    E075988E02
  1. Using a torx socket wrench T30, install the 4 screws and the power outlet socket assembly.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

    NOTICE:
    Install the screws in the order shown the illustration.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }